Views:11 Author:LEIMING Fiona Publish Time: 2018-11-03 Origin:www.cnclaserlm.com
It is well known that copper is a high reflection material with good thermal conductivity. How to process copper materials? We can use many types of equipment, such as fiber laser cutter, plasma cutting machine, etc. Today, LEIMING LASER will show you the solution for processing copper with fiber laser cutter.
First, we should know the specific materials, copper materials can be divided into many kinds, brass and copper are the most widely used materials.
Second, we should be familiar with its thermal conductivity and radiation rate to set the cutting parameters of the fiber laser cutting machine.
In addition, we suggest that the better processing method is to add auxiliary gas - oxygen or nitrogen.
In general, it will cause great damage to the laser lens when laser cutting machine processing high reflection materials, so we should try to cut thin plates less than 2mm. Adding oxygen gas can improve the cutting speed and performance. When adding nitrogen auxiliary gas, it is better to cut the copper plates below 1mm which can guarantee the cutting effect and the smoothness of the cutting surface .
It also requires the operators to have a high level of technology to get better cutting results.
Only in this way, can we process copper materials be more simply. If you want to get more knowledge about fiber laser cutter, feel free to contact us.